Pressurised water pump 4.2bar Voltage:24v Additional sensor for Vetus gas

Additional sensor for Vetus gas detector GD1000: this can be used either as a replacement or to provide a sensor for a different compartment

for example between a hub and a Yamaha or Honda system where a CANverter is not required

AB38B meets CE requirements

The stiffness ratio for these mounts is 1

Pressurised water pump 4.2bar Voltage:24v Additional sensor for Vetus gasThe Vetus WP water pressure pump is designed for pressurised water systems, washing, liquid transfer etc.. The pump is quiet, low energy consumption and can run dry for brief periods without damage. The pump has thermal overload protection, a built in check valve and is an auto demand pump with a built in pressure switch. The WP pump is supplied with an inlet strainer filter and two pairs of 13mm hose connectors (straight and 90 degree). Pressure: 4.