Replacement Tail Cone but there is slightly more

but there is slightly more drag when the Boogie is in follow mode

After about 250 hours of use your Boogie could start to look a bit tired

sand it flat or choose "Spring and Shaft"

you can substitute with a few wraps of insulation tape to hold it in place

Replacement Tail Cone but there is slightly moreReplacement tail cone in case of damage due to the rope getting tangled around the prop, or incorrectly mounting the propellor. Includes M4x10mm socket head screws. Ball nose 3mm allen key driver required for assembly. To save on postage costs you can print your own. Any material will work, the cone does not take load. 20% infill, 4 walls, 4 top and bottom. 10mm M4 screws press in to make assembly easier. V1 V2 Tail Cone V3 Tail Cone